Environmental conditions
Environment conditions data is collected using the Vaisala CO2, Thies Clima weather sensors as well as lightning, irrigation, and weather data collected at the Maricopa site.
Data formats follow the Climate and Forecast (CF) conventions for variable names and units. Environmental data are stored in the Geostreams database.
Data sources
WeatherStation coordinates are 33.074457 N, 111.975163 W
EnvironmentLogger is on top of the gantry system and is moveable.
Irrigation is managed at the field level. There are four regions that can be irrigated at different rates.
Data access
Level 1 data
Level 1 meteorological data is aggregated to from 1 Hz raw data to 5 minute averages or sums.
netCDF: 5s (12 per minute) observations
On Globus or Workbench you can find these data provided in both hourly and daily files. These files contain data at the original temporal resolution of 1/s. In addition, they contain the high resolution spectral radiometer data.
sites/ua-mac/Level_1/envlog_netcdf
hourly files:
YYYY-MM-DD_HH-MM-SS_environmentallogger.nc
daily files:
envlog_netcdf_L1_ua-mac_YYYY-MM-DD.nc
Geostreams: 5 minute observations
Data can be accessed using the geostreams API or the PEcAn meteorological workflow. These are illustrated in the sensor data tutorials.
Here is the json representation of a single five-minute observation:
Data can be accessed using the geostreams API or the PEcAn meteorological workflow.
These are illustrated in the sensor data tutorials.
Here is the json representation of a single five-minute observation from Geostreams:
Variable names and units
CF standard-name | units | bety | isimip | cruncep | narr | ameriflux |
air_temperature | K | airT | tasAdjust | tair | air | TA (C) |
air_temperature_max | K | tasmaxAdjust | NA | tmax | ||
air_temperature_min | K | tasminAdjust | NA | tmin | ||
air_pressure | Pa | air_pressure | PRESS (KPa) | |||
mole_fraction_of_carbon_dioxide_in_air | mol/mol | CO2 | ||||
moisture_content_of_soil_layer | kg m-2 | |||||
soil_temperature | K | soilT | TS1 (NOT DONE) | |||
relative_humidity | % | relative_humidity | rhurs | NA | rhum | RH |
specific_humidity | 1 | specific_humidity | NA | qair | shum | CALC(RH) |
water_vapor_saturation_deficit | Pa | VPD | VPD (NOT DONE) | |||
surface_downwelling_longwave_flux_in_air | W m-2 | same | rldsAdjust | lwdown | dlwrf | Rgl |
surface_downwelling_shortwave_flux_in_air | W m-2 | solar_radiation | rsdsAdjust | swdown | dswrf | Rg |
surface_downwelling_photosynthetic_photon_flux_in_air | mol m-2 s-1 | PAR | PAR (NOT DONE) | |||
precipitation_flux | kg m-2 s-1 | cccc | prAdjust | rain | acpc | PREC (mm/s) |
degrees | wind_direction | WD | ||||
wind_speed | m/s | Wspd | WS | |||
eastward_wind | m/s | eastward_wind | CALC(WS+WD) | |||
northward_wind | m/s | northward_wind | CALC(WS+WD) |
Raw Data
Data is available via Globus or Workbench:
/ua-mac/raw_data/co2sensor
/ua-mac/raw_data/EnvironmentLogger
/ua-mac/raw_data/irrigation
/ua-mac/raw_data/lightning
/ua-mac/raw_data/weather
Sensor information:
Computational pipeline
Description: EnvironmentalLogger raw files are converted to netCDF.
Known Issues
Known issue: the irrigation data stream does not currently handle variable irrigation rates within the field. Specifically, we have not yet accounted for the Summer 2017 drought experiments. See terraref/reference-data#196 for more information.
When the full field is irrigated (as is typical), the irrigated area is 5466.1 m2 (=215.2 m x 25.4 m)
In 2017:
Full field irrigated area from the start of the season to August 1 (103 dap) is 5466.1 m2 (=215.2 m x 25.4 m).
Well-watered treatment zones from August 1 to 15 (103 to 116 dap): 2513.5 m2 (=215.2 m x 11.68 m) in total, combined areas of non-contiguous blocks
Well-watered treatment zones from August 15 - 30 (116 to 131 dap): 3169.9 m2 (=215.2 m x 14.73 m), again in total as the combined areas of non-contiguous blocks
Github Issues
Last updated